Keep carton closing aligned with your packing process. ETI’s BOPP packaging tape range is intended for everyday box sealing, with the final choice guided by the carton surface, packed weight and method of application. A sample trial on your own cartons helps establish whether the proposed tape suits your dispatch conditions.
Use colour to make packing instructions easier to recognise. BOPP colour tape can help distinguish batches, destinations or product groups while closing cartons. Tell ETI how your team uses colour on the packing line so the enquiry covers both the visual identification need and the sealing task.
Bring branded packaging within reach of smaller dispatch runs. ETI accepts single-colour BOPP printed tape enquiries from one box. Upload your logo, arrange its repeat and share your desired tape size to start an artwork and quotation review. Printing feasibility, the quantity of rolls per box and supply terms are confirmed for your requirement.
Make evidence of opening part of the packaging discussion. Security tape is used where a seal should help reveal interference with a carton or pack. Its behaviour depends on the selected construction and the surface underneath, so ETI should evaluate the actual packaging material before a security seal is specified.
Reinforcement across the tape backing makes cross filament tape a candidate for demanding packing and bundling work. The ETI catalogue lists applications involving heavy cartons, metal coils and pipes. Share the load arrangement and handling conditions so ETI can review the reinforcing pattern, tape format and application method for the job.
Looking for a filament tape with reinforcement running in one direction? Send ETI the packing task and any existing tape reference for review. This item is retained from the existing website; the supplied catalogue verifies the cross filament family but does not establish a separate mono filament grade. Exact construction and availability therefore require confirmation.
For woven packaging and industrial wrapping tasks, the tape needs to work with the material already in use. ETI’s catalogue includes HDPE tape for joining and patching bags and cartons, as well as bundling work. Describe the fabric, bag or bundle so the team can assess the contact surface and format.
Bring scattered packs into a more manageable unit for handling and dispatch. Stretch film wraps around loads rather than relying on an adhesive carton seal. ETI can review your pallet shape and wrapping process to help you enquire about an appropriate film format without assuming that one film suits every load.
Give cartons and paper-based packaging a coordinated closing finish with ETI Craft Paper Tape. The catalogue presents this ready-to-apply adhesive tape separately from the water-activated reinforced paper range. Share your carton surface, packing method and roll dimensions so ETI can review the appropriate option. Custom printing is available. Add your company logo, brand name or packaging message to the tape for a consistent identity across dispatched cartons. Send your artwork and preferred print colours, along with the required tape width, roll length and quantity, for a printing quotation. ETI will review the artwork, repeat layout and printing feasibility with you before production. Print colours, minimum quantity, pricing and delivery timing are confirmed during quotation; request a sample or proof where needed for your packaging review.
Reinforced paper tape combines a paper-facing format with reinforcement for packaging applications. The ETI catalogue describes a water-activated version, so the enquiry should cover the dispensing process as well as the carton. Review a trial with your packing team before changing from a pressure-sensitive carton tape.
Join lightweight materials without leaving an exposed fastening face. Hotmelt tissue tape uses a thin tissue carrier between adhesive layers and is considered for converting, lamination and light assembly. ETI can assess the materials you are joining, particularly where absorbent surfaces or the production environment influence the bond.
A tissue carrier helps position the adhesive between two surfaces during lamination and assembly. ETI’s solvent tissue range should be selected against the actual materials and service conditions rather than the product name alone. Send material samples or details of the existing process when asking about a suitable grade.
Foam-backed bonding introduces a conformable layer between mating surfaces. It can help accommodate small surface differences in mounting and assembly, provided the foam and adhesive match the task. ETI can review your component, surface finish and environment before recommending a sample for evaluation.
PE foam tape is an option to discuss when the assembly needs a foam layer for mounting, cushioning or insulation-related work. The right construction depends on whether the tape is being used to bond two faces or support a sealing detail. Explain the joint rather than guessing a grade from appearance.
Keep spacing requirements visible in your glazing or panel enquiry. Spacer tape is considered where a foam strip helps define the gap between assembly parts. ETI needs the joint geometry and the surrounding sealing or bonding system to review the tape in context; a spacing strip alone does not establish the performance of the complete assembly.
DHB tape belongs to ETI’s acrylic foam bonding range for assembly applications such as trims and panels. A successful proposal starts with the two materials being joined and the forces the joint will experience. Share drawings or a component sample so ETI can review contact area, surface preparation and a suitable trial approach.
Mirror mounting requires attention to the backing as well as the wall or support surface. ETI can review a tape enquiry against the mirror dimensions, finish and installation design. Test compatibility with the actual mirror backing and obtain advice on the complete fixing arrangement before relying on adhesive mounting.
Multi Stick Tape is a general joining option in the ETI catalogue for assemblies involving different materials. Start the enquiry with what must be attached, how much contact area is available and how the finished assembly will be used. Those details are more useful than choosing an adhesive solely by roll colour.
A cloth carrier gives this double-sided tape family a distinct handling format for fixing and joining tasks. ETI’s catalogue includes carpet fixing and printing-related uses. Describe the surface finish and whether the bond is temporary or retained in service so the team can review removal needs alongside adhesion.
Polyester tape is used in thin-film joining and production tasks where a low-profile tape format is useful. ETI’s catalogue includes applications involving splicing, graphics and display work. Identify the material being joined and any heat or process exposure so a specific construction can be reviewed rather than assumed.
Close the discussion around the gap, not just the roll. EPDM foam seal tape is considered for sealing and cushioning details around doors, windows and enclosures. ETI can review the joint size and compression available to help you enquire about a foam strip that fits the assembly and its conditions of use.
Nitrile foam tape appears in ETI’s catalogue for insulation, sealing and cushioning applications around equipment and services. Tell the team whether the strip sits on a panel, pipe or enclosure, and what the surrounding environment is like. Material selection and fit should be checked against the actual installation.
A gasket strip needs to follow the joint and compress in a controlled way. ETI’s gasket tape range can be discussed for sealing, insulation and cushioning details in industrial assemblies. Share a drawing or sample of the mating parts so the enquiry addresses the seal geometry and operating conditions.
For overlapping joints and repair details, butyl tape provides a sealing approach worth reviewing with the actual surface in mind. ETI’s catalogue shows applications around roofing and building interfaces. The proposed tape, preparation and overlap should be assessed together, especially where weather, movement or an existing coating affects the joint.
Prepare threaded joint enquiries around the service conditions. PTFE thread seal tape is wrapped on compatible threaded connections to support sealing during assembly. Tell ETI the pipe material, thread form and conveyed medium; suitability for a particular pressure, temperature or regulated service must be confirmed for the selected product.
Define the area to be painted while protecting adjacent work. ETI’s masking tape range can be assessed for painting, positioning and temporary covering tasks. Surface condition, paint system and removal time all affect selection, so try the proposed tape on a representative area before using it across a finished job.
Curved paint edges and close colour separations call for a tape format suited to the shape. Fine line masking tape is included in ETI’s range for detailed painting work. Send the curve or design requirement and process conditions so ETI can review handling, edge definition and removal as part of the same task.
Holding a component or masking a selected area during a heated process requires more than choosing an amber-coloured roll. ETI lists High Temperature Sublimation Tape for process-related enquiries. Share the full temperature-and-time profile, contact material and removal requirement so the team can verify the intended grade before a production trial.
Cover adjacent surfaces before painting with a pre masking format that brings a masking edge and protective covering into the same task. The ETI catalogue illustrates a film-and-tape masking format. Tell the team the area to be covered, paint process and surface finish so the proposed roll can be checked for application and removal.
Move a cut graphic from its liner to the intended surface with its arrangement intact. ETI’s application tape range is relevant to sign and graphic transfer work. Ask the team to review the lettering size, graphic material and finish, since a transfer tape must pick up the design and then release it at the appropriate stage.
Protect a finished surface while it passes through fabrication, transport or installation. ETI’s surface protection range should be selected for the specific substrate and finish, with removal treated as part of the requirement. A trial on the actual material helps check adhesion, marking and release under the expected exposure conditions.
Bring seam and patching requirements into one clear HVAC enquiry. ETI lists aluminium foil tape for ducting and related insulation work. The facing, adhesive and joint conditions need to suit the surface being sealed; specify any required performance documentation rather than assuming a rating from the metallic appearance.
Match the tape to the insulation facing. FSK refers to foil, scrim and kraft, a construction used around insulation systems and their joints. ETI can review the facing already installed, the seam layout and the service environment so the proposed tape supports the detail being assembled.
A thermal interface enquiry should describe the heat path as well as the fixing task. ETI’s thermal conductive tape range can be reviewed for electronic assemblies involving heat sinks or related components. Share contact area, gap and operating conditions so the team can establish which grade information and sample checks are needed.
Copper foil tape is considered in electrical contact and shielding-related assemblies where the conductive path must be understood. ETI can review the overlap, substrate and contact arrangement before a grade is selected. Conductivity through the adhesive is a separate property to verify; the presence of a copper backing alone does not confirm it.
Organise electrical tape selection around the installation and the required documentation. ETI’s PVC insulation tape range includes wire wrapping, bundling and identification uses. Explain the cable environment and any specified electrical or flame performance so the team can check the selected grade instead of treating all PVC tapes as interchangeable.
A harness wrap needs to fit the way cables are routed and handled. ETI lists wire harness tape for cable bundling and protection in electrical and automotive-related work. Tell the team where the harness sits and what exposure it faces so the carrier, adhesive and wrapping format can be reviewed.
For wrapping tasks that combine handling and mechanical protection needs, friction tape is a separate family to discuss with ETI. The catalogue includes electrical and cable-related applications. Provide the assembly detail and required performance criteria so the proposed wrap can be assessed without assuming an electrical rating from its appearance.
Rayon tape offers a cloth-based wrapping format within ETI’s electrical and specialty range. It can be discussed for cable and wire assembly work where the backing and handling characteristics matter. Explain the wrap purpose and service conditions so the team can review an appropriate construction and supporting grade information.
Keep the contact surface of a heat-sealing process central to the enquiry. ETI’s catalogue describes a PTFE-coated glass cloth tape family used where release behaviour and heat exposure matter. Send the machine details and sealing cycle so the team can review the backing, adhesive arrangement and replacement format.
Heated production work covers several tape families, each with a different purpose. The ETI catalogue illustrates polyester, polyimide, glass cloth and other specialty options within its high-temperature overview. Start with the operation—masking, holding, wrapping or joining—then provide the process profile so ETI can narrow the enquiry to a specific grade.
A straightforward black finish for anti-slip strip requirements on steps, access points and pedestrian routes. ETI Black Anti-Skid Tape offers a discreet starting point where the grip strip should sit visually within the surrounding surface. Share the installation surface, exposure and intended use with ETI before selecting the grade. Request a sample to evaluate adhesion and the finished surface in your own application. Dimensions, availability and application guidance are confirmed during quotation.
Keep the surface appearance in focus while discussing an anti-slip treatment. ETI Clear Anti-Skid Tape is a transparent option for applications where a dark or contrasting strip would interrupt the look of the floor or step. Share the installation surface, exposure and intended use with ETI before selecting the grade. Request a sample to evaluate adhesion and the finished surface in your own application. Dimensions, availability and application guidance are confirmed during quotation.
Bring a low-light visibility requirement into the anti-slip conversation. This ETI variant combines an anti-skid tape format with a glow-in-the-dark feature for step and access-route marking requirements. Share the installation surface, exposure and intended use with ETI before selecting the grade. Request a sample to evaluate adhesion and the finished surface in your own application. Dimensions, availability and application guidance are confirmed during quotation. The glow feature is not a substitute for emergency lighting or a verified evacuation system. Ask ETI to review light charging and application conditions; no glow duration is specified here.
Make the strip stand out as part of your floor or step marking plan. ETI Yellow & Black Anti-Skid Tape uses a contrasting striped appearance for applications where visual attention and an anti-slip surface are both part of the requirement. Share the installation surface, exposure and intended use with ETI before selecting the grade. Request a sample to evaluate adhesion and the finished surface in your own application. Dimensions, availability and application guidance are confirmed during quotation.
Discuss a clear anti-skid option for wet-area and barefoot-use requirements. This ETI variant is listed as a water-resistant transparent format; share the actual contact conditions so our team can review the appropriate tape for your bathroom or similar setting. Share the installation surface, exposure and intended use with ETI before selecting the grade. Request a sample to evaluate adhesion and the finished surface in your own application. Dimensions, availability and application guidance are confirmed during quotation.
Make route and edge markings part of the visibility discussion. ETI lists luminous tape for low-light marking applications. The intended lighting conditions and charging exposure need to be explained so the team can review a suitable option; glow duration or compliance should be established from the selected grade’s current documentation.
Return incident light toward its source to make selected markings easier to recognise. Retro reflective tape is included in ETI’s safety range for visibility-related applications. Describe the vehicle, equipment or location and any mandatory marking standard so ETI can verify the proposed construction rather than assuming road-use approval.
Make work areas easier to read through planned floor lines and zone markings. ETI’s floor marking range can be discussed for aisles, storage positions and hazard boundaries. Selection should account for the floor finish and traffic pattern, with a sample applied in the intended location before wider installation.
Keep a versatile tape format available for general sealing, patching and maintenance enquiries. ETI’s duct tape range is relevant to workshop and HVAC-related tasks, with the actual surface and exposure determining the grade to consider. Tell the team whether the tape is temporary, enclosed or left exposed after application.
Protect and finish the joined edge of a book or bound document with a tape chosen for the cover materials. ETI includes book binding applications in its cloth tape range. Share the spine width, cover finish and appearance requirement so the enquiry addresses handling and adhesion as well as colour.
A cloth backing can suit wrapping, covering and fixing tasks where handling differs from a thin film tape. ETI’s single side cloth tape range can be reviewed against the part being covered and the conditions in service. Send the application detail so the team can check adhesion, conformability and finish.
Plan the tape and jointing compound as one finishing system. ETI’s dry wall joint tape is a mesh-format product for panel joints and surface finishing work. Describe the board and compound being used so the tape can be reviewed for the intended joint treatment and application sequence.
Attend to formwork joints before placing concrete. Shuttering tape is used in ETI’s catalogue for covering joints in shuttering assemblies, where leakage of cement slurry is a practical concern. Explain the formwork material and joint condition so the tape format and preparation can be reviewed for the casting process.
For removable mounting enquiries, begin with the surface and the object rather than a universal holding claim. ETI’s Nano Magic Tape can be discussed for suitable household, display and light fixing applications. Test it on a small area of the actual finish, particularly where paint, coatings or later removal are involved.
Try another product name or describe your application to ETI.
Discuss your requirement ↗Tell us your application, dimensions and quantity. Our team can review your enquiry.